Nabata na webụsaịtị anyị!

Igwe na-emepụta ọkpọkọ rọba / otu mgbidi corrugated Pipe Extrusion Line/Ahịhịa mmepụta ọkpọkọ otu mgbidi sitere na China

Nkọwa dị mkpirikpi:

PVC-U okpukpu abụọ mgbidi corrugated ọkpọkọ UPVC nkwurịta okwu corrugated anwụrụ ọkụ na ezigbo mgbochi ịka nká

110PVC nkwurịta okwu corrugated ọkpọkọ nwere pụtara ìhè ala okpomọkụ iguzogide

pvc corrugated ọkpọkọ ike nkwurịta okwu ọkpọkọ liri drainage ọkpọkọ PVC okpukpu abụọ mgbidi corrugated ọkpọkọ

pvc okpukpu abụọ nke mgbidi corrugated ọkpọkọ pvc-u nkwurịta okwu ọkpọkọ SN4 / SN8 dayameta 110-500 5G nkwurịta okwu ọkpọkọ


Nkọwa ngwaahịa

Mkpado ngwaahịa

nkwukọrịta 2

Anyị bụ ndị ọkachamara na-emepụta ọkpọkọ ọkpọkọ,ma kwadebere ya ọkachamara teknụzụ mmepụta otu ma ọ bụrụ na ị nwere mmasị na ngwaahịa anyị ma ọ bụ nwee ajụjụ ọ bụla, biko kpọtụrụ anyị ozugbo enwere ike, m ga-agbalị ike m niile inyere gị aka dozie nsogbu gị.

Nkọwa ngwaahịa

Nke a na mmepụta akara nwere ike na-emepụta PE, EVA, PVC, PP na PA otu mgbidi corrugated pipe.Single mgbidi corrugated ọkpọkọ nwere atụmatụ nke elu okpomọkụ na-eguzogide, corrosion na abrasion eguzogide, elu ike na ezi mgbanwe.A na-ejikarị ya na ọkpọkọ mmiri nke ikuku ikuku na igwe ịsa ahụ.

Ndepụta akụrụngwa

otu ịghasa extruder → akpụ igwe → akpaka shrink ọkpọkọ igwe → cutter

Sistemụ jụrụ oyi: mmiri na ikuku

nkwukọrịta 3

 SJSZ65/132 conical ejima ịghasa extruder

HDPE/PP/ PVCDWC Ugboro abụọ ahịrị eriri extrusion ọkpọkọ / igwe

ọhụrụ ọnọdụ PVC / PE plastic esichara otu mgbidi corrugated ọkpọkọ eme igwe / mmepụta akara

nkwukọrịta 4
nkwukọrịta 5
nkwukọrịta 6
nkwukọrịta 7
nkwukọrịta 8

Isi igwe (nwere ike ịme dịka ihe nlele ma ọ bụ eserese onye ọrụ si dị)

nkwukọrịta 9
nkwukọrịta 10

Ihe a bụ 45 # ebu, nke nwere igwe anaghị agba nchara, nke nwere uru nke ngwa ngwa extrusion ngwa ngwa, extrusion otu, na nrụgide isi dị ala.

NA-Akpụrụ ebu

nkwukọrịta 11
nkwukọrịta 12

Ihe a bụ 45 # ebu, nke nwere igwe anaghị agba nchara, nke nwere uru nke ngwa ngwa extrusion ngwa ngwa, extrusion otu, na nrụgide isi dị ala.

igwe eji akpụzi ọhụrụ

nkwukọrịta 13
nkwukọrịta 14
nkwukọrịta 15

 Arụmọrụ & Uru: Ahịrị ọkpọkọ corrugated bụ ọgbọ nke atọ nke ngwaahịa emelitere.Ihe mmepụta nke extruder na mmepụta ngwa ngwa nke ọkpọkọ na-abawanye site na 20-40% ma e jiri ya tụnyere ngwaahịa gara aga.Enwere ike nweta mgbịrịgba n'ịntanetị iji hụ na arụmọrụ nke ngwaahịa ọkpọkọ kpụrụ akpụ.Na-anabata Siemens  usoro.
1. The ọhụrụ e mechiri emechi igwe ịkpụzi adopts a pụrụ iche elu-arụmọrụ jụrụ usoro maka akpụ modul, nke ukwuu mma jụrụ arụmọrụ na mmepụta nke corrugated ọkpọkọ ngwaahịa;
2. High-speed, elu-arụpụta otu-ịghasa extrusion igwe na-akwado a ọkachamara imewe nke corrugated ọkpọkọ extrusion ebu iji nweta nnukwu-ọnụ ọgụgụ mụ extrusion;
3. Ezi mgbanwe nke modul;na-akpụ modul elu njupụta ihe, ọ dịghị ìhè pores, ogologo oge ojiji na-adịghị mfe oruru.Nwere ike hazie atụmatụ modul waveform dị iche iche dịka ihe onye ọrụ chọrọ;
4. Na-akwado akpaka DWC akpaka, njikwa kọmputa, ọnọdụ ịkpụ nke ọma, na-agba ọsọ kwụsiri ike ma dị mfe ịrụ ọrụ.

MKPỤRỤ KWỤKWỌ KWESỊRỊ

nkwukọrịta 16
nkwukọrịta 17

HDPE PP DWC Sewage okpukpu abụọ mgbidi corrugated ọkpọkọ plastic extrusion igwe ahịrị

PE / HDPE / PVC okpukpu abụọ mgbidi corrugated ọkpọkọ extrusion akara adopts extruding na akpụ usoro, o nwere atụmatụ nke a pụrụ ịdabere na àgwà na elu efficiency.Compared na ndị ọzọ plastic ọkpọkọ mgbidi Ọdịdị, okpukpu abụọ mgbidi corrugated ọkpọkọ nwere magburu onwe mgbidi Ọdịdị imewe, ya ala arọ iru eru. ọnụ ahịa mmepụta dị ala ma melite asọmpi ahịa.

A na-ejikarị ọkpọkọ eme ihe n'ọhịa dị iche iche kama ọ bụ ọkpọkọ ọkpọkọ na ọkpọkọ ígwè, n'ihi na ọ nwere njirimara magburu onwe ya dị ka: njikọ dị mfe na ngwa arụnyere, na àgwà a pụrụ ịdabere na ya.


  • Nke gara aga:
  • Osote:

  • Dee ozi gị ebe a ziga anyị ya