SJSZ-65/132 PVC osisi plastic profaịlụ mmepụta ahịrị
Nka nka maka nhazi zuru oke
Okwu mmeghe dị nkenke
| No | ihe | oke |
| 1 | Resin dabara adaba | PVC + ihe mgbakwunye ndị ọzọ |
| 2 | Ọsọ ahịrị | 0-10m/min |
| 3 | mmepụta | 180-240 n'arọ / h |
| 4 | Akụkụ elu | 26 х 1.5 х 2.5 m |
| 5 | Ịnye ọkụ | 380V, 50Hz, ma ọ bụ site ahịa pụrụ iche chọrọ |
SJSZ-65/132 PVC osisi plastic profaịlụ mmepụta akara parameters
| Oghere Usoro No | Aha akụrụngwa | Nlereanya | Ọnụọgụ | Okwu |
| 1.1 | Akpaaka ịghasa feeder | KLX-300 | 1 setịpụrụ |
|
| 1.2 | Conical ejima ịghasa extruder | SJSZ-65/132 | 1 setịpụrụ |
|
| 1.3 | Ikpo okwu ịkpụzi oghere | CS-6000 | 1 setịpụrụ |
|
| 1.4 | Igwe traction | CS-240 | 1 setịpụrụ |
|
| 1.5 | Igwe nchacha | CS-300 | 1 setịpụrụ |
|
| 1.6 | Na-ebupụ ngwaọrụ | CS-6000 | 1 setịpụrụ |
|
2.Technical oke
| 1.1 CS-300 Akpaka ịghasa feeder | |||
| (1) | Ike igwe nri | KW | 1.5 |
| (2) | Dayameta nke ọkpọkọ nri | mm | Φ102 |
| (3) | Ogologo ọkpọ nri nri | M | 4-5 |
| (4) | Ihe eji ebufe ọkpọkọ |
| Igwe anaghị agba nchara |
| (5) | Ikike ibufe | KG/h | 300 |
| (6) | Mpempe akwụkwọ | KG | 200 |
| (7) | Ihe nke igbe ihe |
| Igwe anaghị agba nchara |
| (8) | voltaji ọkọnọ |
| 380V/50HZ |
1.2 SJSZ-65/132 Conical ejima ịghasa extruder
| (1)Ịghasa&Kpaghara | |
| Dayameta nke ịghasa: | Φ65/Φ132mm |
| Ọnụọgụ nke skru: | 2 |
| Ntugharị skru: | Ntugharị mpụta a na-emekọrịta ihe |
| Isi ike ịghasa: | HV: 740 |
| Isi ike gbọmgbọm: | HV：940 |
| Ihe ịghasa na screw barrel: | Ọgwụgwọ nitriding 38CrMoAIA |
| Nitriding oyi akwa omimi nke skru barrel: | A na-efesa gbọmgbọm ịghasa 0.4-0.7mm na alloy n'ihu |
| Ụdị ikpo ọkụ: | Igwe ọkụ nke mgbanaka kpo oku aluminom |
| Ụdị nhazi ọsọ nke injin: | Usoro ngbanwe ugboro ugboro |
| (2)Mbelata&igbe nkesa | |
| Ụdị nwụnye: | Ntinye kwụ ọtọ |
| Mbelata: | Ihe na-ebelata ike |
| Ngwa ngwa: | 20CrMnTi bụ carburized na menyụọ, na ike nke HRC58-62 degrees.A na-ahazi ya site na igwe ihe iji hụ na nnyefe gia ziri ezi ma belata mkpọtụ. |
| Ụdị oyi: | A na-eme ka mmanụ gia dị jụụ site na ịkwanye mmiri site na condenser |
| Nbubata mbubata: | Mbupụta torque dị elu |
| (3) Ejima ịghasa mmanye nri | |
| Ụdị nri: | Igwe ejima skru akpaghị aka na mbufe |
| Ụkpụrụ nhazi ọsọ: | Njikwa ugboro ugboro |
| (4) Usoro njikwa ọkụ eletrik | |
| Onye kọntaktị: | SIEMENS |
| Mita akara okpomọkụ: | Omron/Delta |
| Ihe ntụgharị ugboro ugboro: | ABB/Delta |
| Mgbanwe ikuku nke sekit breaker: | SCHNEIDER |
1.3 CS-6000 Vacuum nhazi ikpo okwu
| Ogologo ikpo okwu: | 4000mm |
| Ntuziaka nwụnye ebu: | Profaịlụ alloy aluminum dị elu nwere T-groove |
| Ojiji nke vortex fan: | Mmiri na-asọ oyi n'elu ngwaahịa a mịrị amị |
| Ịtọ ntọala tebụl: | Ndozi elu na ala bụ igbe worm gear na ngbanwe mkpanaka mkpara Nhazi aka ekpe na aka nri bụ ngbanwe mkpara skru A na-edozi ihe nkwado mmiri nke tebụl nha site na igbe worm gear na mkpanaka mkpọ |
| Ogologo ngwaọrụ mkpanaka eletrik: | 800mm |
| Ụdị nke cycloidal reducer planetary (na-aga n'ihu na azụ): | A na-eji 1.1KW cycloidal pinwheel reducer moto maka mmezi |
1.4 CS-240 The traction igwe
| Ụdị traktị: | Ọkpụkpụ egwu ugboro abụọ | |
| Ihe mgbochi roba: | Silica gel | |
| obosara ngọngọ rọba: | 240mm × 1 | |
| Ụdị njigide: | Ụdị crank cylinder | |
| Ụkpụrụ nhazi ọsọ: | Usoro ngbanwe ugboro ugboro | |
| 1.5 CS-300Igwe nchacha | ||
| Ụdị njigide: | Pneumatic | |
| Nha ịkpụ: | 10-300mm | |
| 1.6,CS-6000 Full akpaka akara mgbapụta ngwaọrụ
| ||
| Ogologo: | 6000mm | |
| Ihe tebụl: | Igwe anaghị agba nchara | |
| Ụdị mwepụta: | Jiri cylinder | |
| Ụdị mwepụ: | Nbudata akpaaka | |
