AHỤRỤ COD PIPE

Kedu ihe bụ COD?

1. Otutu ọwa eriri eriri
COD mejupụtara ọwa ime ime ọnụ na ọkpọkọ dị n'èzí.Ogo ya na qty nke ọwa ime nwere ike ịdị iche iche dịka arịrịọ ndị ahịa si dị.

2. Cod=igwe igwe ọwa mmiri nchara

2. HDPE (Elu njupụta Poly Ethylene)
A na-eme COD nke 100% HDPE nke nwere ike dị elu & ike mkpakọ siri ike.

n'ihi na ya magburu onwe uru & na-eri ala.
Uru nke COD

1. Ịchekwa ego nrụnye
30-50% echekwa ego ma e jiri ya tụnyere usoro ọwa mmiri
(PVC ọkpọkọ + eriri ime)

2. Dị ka wụnye si warara ebe
Usoro omenala: Nnukwu Trench (obosara 1 mita na omimi 1.2 mita) dị mkpa.
COD: 0.2 - 0.3 Mita obosara & naanị omimi 0.5 Mita.

3. Ntinye ngwa ngwa
- Nkịtị Excavator: 1,000m / ụbọchị nrụnye dị (8 ọrụ awa / ụbọchị)
- Akpaaka excavator: 3,000m / ụbọchị echichi dị.
- Okwu nwụnye;ọ bụ ngwa ngwa 20 ~ 30 ugboro karịa usoro usoro

4. Ọ dịghị mkpa jikọọ n'etiti manhole
- Manhole chọrọ 500m ma ọ bụ 1,000m ọ bụla na-enweghị njikọ.
- Ọ dịghị mkpa njikọ maka agbagọ ebe.

A na-eme ma ọnyà dị n'ime na oghere mpụta nke COD bụ nke HDPE nwere otu akụrụngwa, nke bụ anụ ahụ pụrụ iche.

- COD eji echekwa eriri fiber optic

- Nhazi pụrụ iche (Ọdụdọ dị n'èzí bụ ụdị corrugated gburugburu, duct nke ime bụ duct kwụ ọtọ)

- Ọ nwere ike ịnye site na 2 nke ime duct ruo 11 nke n'ime duct na arịrịọ ndị ahịa.

- Enwere ike ibunye COD n'ogologo mpịakọta na-aga n'ihu site na 300M ruo 1,000M

Nkọwa nka nka nke COD Cable Pipe Production Line

Ahịrị mmepụta ọkpọkọ dị n'ime

I. SJ-65/30 otu ịghasa extruder                    1 set

Nke a extruder bụ tumadi eji maka extruding nke ọkpọkọ na ọ na-onwem na a siri ike eze n'elu ọsọ reducer, ma gia na axis na-mere nke alloy ígwè na e esichara site nitriding na egweri.Ihe nke ịghasa na gbọmgbọm chaja bụ 38CrMoALA nwere ọgwụgwọ nitrogen.The ịghasa adopts pụrụ iche ụdị nchebe ihuenyo plasticization panel, o nwere autoregulation dijitalụ ngosi switchboard na a Siemens contactor.Igwe njikwa okpomọkụ bụ RKC mere na Japan.A na-achịkwa nnukwu injin ya ugboro ugboro ma nwee igwe chaja akpaka.

Oke teknụzụ isi:

Dayameta nke ịghasa: ф65

L/D 30:1

Gbanwee ọsọ nke ịghasa: 10-100r / min

Mpụpụta (kacha): 80-120kg / h

Ike ikpo oku: 22KW

Isi ike engine: 37KW

High-ọsọ extruding Die isi

A na-eji ígwè anwụ anwụ dị elu mee ya, ọ nwere ogo dị elu nke ziri ezi na ogologo ndụ.Ọ nwere atọ coextruding eruba eruba na a gburugburu Ọdịdị ya mere o nwere àgwà nke elu na-agba, ọbụna extruding na ala nrụgide nke isi anwụ anwụ.

1. COD 110 mm n'ime 5 sub-duct (5 x 33 mm / 28mm) na PP eriri 6 mm
2. COD 110 mm n'ime 3 sub-duct (3 x 42 mm / 38mm) na PP eriri 6 mm
3. COD 110 mm n'ime 4 sub-duct (4 x 38 mm / 32mm) na PP eriri 6 mm
4. COD 110 mm n'ime 7 sub-duct (7 x 29 mm / 25mm) na PP eriri 6 mm
5. COD 77 mm na atọ Sub-duct n'ime

IV.Ebe mmiri mmiri SGZJ-75 nwere oghere

A na-ejikarị igwe a eme ihe maka nha na oyi nke ọkpọkọ.Ejiri ya na mgbapụta ikuku na-ekpo ọkụ na mmiri mgbapụta mmiri na-eji maka nha na oyi.Mgbapụta mmiri na-eji mmiri na-ekesa n'ime igbe ahụ, ma ntinye na ntinye mmiri na-achịkwa valves.Ejiri ya ngwaọrụ nwere ike ịhazigharị ihu na azụ, aka ekpe na aka nri, elu na ala ka o wee ghọta mgbanwe 3D.Akụkụ bụ isi nke igwe bụ igwe anaghị agba nchara ka mma nke mmiri na-ekesa na-eme ka mma.

Oke teknụzụ isi:

Ogologo igbe oghere: 6000mm

Ike mgbapụta ikuku ikuku: 4KW

Ike mgbapụta mmiri: 3KW

Ike moto mkpanaka: 0.75KW

Ụzọ jụrụ oyi: ụdị ịgba mmiri jụrụ oyi

SGPL-75 fesa mmiri mmiri

A na-ejikarị igwe a eme ihe maka ịgba oyi nke abụọ nke ọkpọkọ.

Oke teknụzụ isi:

Ogologo igbe oghere: 6000mm

Ike mgbapụta mmiri: 3KW

Ụzọ jụrụ oyi: ụdị ịgba mmiri jụrụ oyi

VI.Igwe eji ebu SLQ-75

A na-ejikarị igwe a na-akpụzi na ịkwanye ọkpọkọ, a na-achịkwa moto na-ebugharị ugboro ugboro na transducer bụ Fuji mere na Japan.

Ogologo mbupu dị irè: 800mm

Ọnụọgụ nke pedrail: 2

Ọsọ mbugharị: 0.3-18m / miu

Ike moto na-ebu: 2.2KW

VII.Igwe mkpuchi SGJQ-2000

A na-ejikarị igwe eme ihe maka ịkwanye ọkpọkọ.Ọ na-eji mkpuchi memental.

Oke teknụzụ isi:

Ike mmepụta: 10N.M

Ihe mkpuchi mkpuchi (max) φ2600mm

Mita mkpuchi: 1000m

The cod anwụrụ mkpuchi ọkpọkọ eriri

II.Co-extrusion Line maka ọkpọkọ dị n'èzí nwere ọkpọkọ ise

Budata okpokoro ọkpọkọ 7 setịpụ

Ngwaọrụ na-eduzi (paịpụ na-eduzi na-abanye na extruder jikọtara) 7 sets

Sistemu ejikọtara: 1 nkeji