Akara Ibé akwụkwọ GOOMEMBRANCE LAYER ATO
HDPE Smooth Geomembran 1.5mm ọnụ ahịa ụlọ ọrụ pondliner
Nke a mmepụta akara nwere ike na-emepụta geotextile, compound geo-products, ike ike-surfaced geo-products etc.Products si a akara nwere atụmatụ nke elu impermeability, ezi chemical kwụsie ike, magburu onwe mgbochi ịka nká Njirimara, elu n'ibu ike ezi ewu convenience.In mgbakwunye, A na-eji ngwaahịa ndị a na-eme enyi na enyi na-adịghị egbu egbu n'ọtụtụ ebe na-ewu ụlọ dị ka ọrụ nchekwa mmiri nke ime obodo, aquaculture, engineering ubi, landification, Ngwuputa, ụlọ ọrụ ụgbọ njem, ugbo.
The ụlọ ọrụ pụrụ iche na mmepụta nke drainage osisi mmepụta akara, polymer waterproof osisi ahịrị, geomembrane mpempe akwụkwọ mmepụta akara, na-abụghị asphalt dabeere onwe-nrapado film eriri igwe mmepụta akara.
CS7000 Nka na ụzụ parameters nke PE waterproof membrane akụrụngwa mmepụta ahịrị
Ngwa ngwaọrụ na atụmatụ
Ngwá ọrụ a nwere oke akpaaka, obere ike oriri, ọrụ dị mfe na mmepụta dị elu.Elu nke ngwaahịa ndị a na-emepụta na-adị mma ma na-egbuke egbuke, na-enwe ike ike ike na arụmọrụ kwụsiri ike.
Geomembranes bụ ihe mgbochi siri ike nke sịntetik akpụkpọ anụ ma ọ bụ ihe mgbochi ejiri ya na ihe ọ bụla metụtara injinia iji chịkwaa ịkwaga mmiri (ma ọ bụ gas) na ọrụ mmadụ mere, ihe owuwu, ma ọ bụ sistemụ mmadụ mere. Enwere ike ime ha site na impregnation nke geotextiles na asphalt, elastomer ma ọ bụ polymer sprays, ma ọ bụ dị ka multilayered bitumen geocomposites.Na-aga n'ihu polymer mpempe akwụkwọ geomembranes bụ, n'ebe dị anya, ndị kasị nkịtị.
Ụdị | CS7000 |
Ogologo nkedo kacha (mm) | 7000; |
Okpokoro (mm) | 0.8-3.0;(± 3%) |
ọsọ (m/min) | 3—8 |
Ogologo ịghasa (mm) | Φ150:30/1×3 nhazi |
Nsonaazụ (kg/h) | 1200-1400 |
Calender mpịakọta dayameta (ihe bụ 45 nchara enweghị nkebi ígwè anwụrụ) | Φ700 |
Ogologo Roller (mm) | 7300 |
Dayameta ikuku (mm) | Φ600 |
Ike kpo oku Barrel screw (kw) | 210 |
Mpaghara kpo oku Barrel (ihe nkedo luminum kpo oku)kw | 7×3 |
Igwe ọkụ ọkụ na-agbanwe ihuenyo) | 10×3 |
Mpaghara njikwa okpomọkụ nke na-agbanwe ihuenyo | 1 × 3 |
Ike kpo oku (kw) | 180 |
Ebe njikwa okpomọkụ anwụ anwụ | 36 |
ngụkọta ike kw (kw) | 780 (mgbe emepụtara 420) |
Ihe nrụnye ihe na-eme ka ikuku jụrụ oyi | 7×3 |
Ịghasa ọsọ rpm | 0-75 |
Omimi Nitriding screw (mm) | 0.4-0.7 |
Nitriding hardness nke ịghasa (angular plated alloy steel) | HV720-940 |
Mpịakọta elu elu runout (mm) | 0.03 |
Mpịakọta concave-convex kwụ ọtọ mm/m | 0.1 |
Mpịakọta nke ọma | 2 ≤0.13% |
ike chọrọ | 380V AC, ± 7% (GB12325 ọkọlọtọ) |
chọrọ ugboro ugboro | 50Hz, ± 0.5Hz (GB/T15945 ọkọlọtọ |
ọnọdụ mmepụta Mpaghara ntinye: ogologo: 22 mita;obosara: mita 15;elu: 4 mita. usoro eruba Nri → flat extrusion → atọ-rola nkedo calendering → jụrụ, flattening na nhazi → Mba 1 isi traction → erughị ala nchekwa ngwaọrụ → Mba 2 inyeaka traction → mita mita akpaka ịkpụ → winding akụrụngwa mejupụtara: 1. Akụkụ nri 2. Akụkụ ndị ọbịa 3. Akụkụ extrusion 4. Kalenda akụkụ 5. akụkụ traction 6. Ịcha akụkụ 7 akụkụ esemokwu 8. Akụkụ ikuku 
Ngwa
1. Municipal gburugburu ebe obibi oru ngo, mmiri nchekwa oru ngo
2.Okpu okpu (mmechi),Ngwuputa obo leach
3.Pond liner, canal linings, tank linings, raw mmiri ọgwụgwọ reservoirs, njigide ọdọ mmiri
4.Waste mmiri ọgwụgwọ ọdọ mmiri, ihe nke abụọ
5.Geomembranes, geosynthetics, geocomposites, geosynthetic ụrọ liners, na PE-100 ọkpọkọ maka Ngwuputa ngwa na-achọ a elu ogo nke njide, kwụsie ike, abrasion iguzogide, na ogologo ndụ.
PVC PE Waterproof mpịakọta mmepụta ahịrị
Igwe eji ewepu mpempe akwụkwọ Geomembrane rọba
Dị ka ihe ọhụrụ, HDPE geomembrane nwere magburu onwe mgbochi-seepage, mgbochi corrosion na ezigbo kemịkalụ nkwụsi ike, na ike hazie ya dị ka n'ezie engineering mkpa, A na-eji ya ọtụtụ ebe maka seepage mgbochi nke dykes, dams na reservoirs na mmiri nchekwa oru ngo. , ma na-ejikwa ya dị ka mgbochi-seepage, mgbochi corrosion, ntapu proof na mmiri ihe na-egosi na ọwa, reservoirs, mmiri mmiri ọdọ mmiri, igwu ọdọ mmiri, ụlọ ewu ụlọ, n'okpuru ala ụlọ, mkpofu ahịhịa, gburugburu ebe obibi engineering, wdg.
