Nọmba: 20220909
Ụbọchị: Septemba 9, 2022
ONWETA:
ONYE na-ere:Qingdao Cuishi Plastic Machinery Co., Ltd
Adreesị: Obodo Yahuicun, okporo ụzọ xianggang, ụzọ okporo ụzọ Shenhai, obodo Jiaozhou, Shandong Province, china, koodu nzipu ozi: 266300
Onye kọntaktị : sevenstars lucy Mob : 0086 15753291269
www.cuishimachine.com www.cuishiextruder.com
Nkọwa nke arịa:
| Aha Ngwaahịa
| Ọnụọgụ
|
| SJ65/33 extruder na akpaaka loader na draya(55KW moto, ABB / Delta inverter, siemens contactor, ORMON / DELTA okpomọkụ akara mita na mmepụta 200kg / h | 1 set |
| SJ25 agba akara extruder maka akara akara | 1 set |
| 16-110mm ọkpọkọ ebu / anwụ isi na-anwụ ntụtụ na-anwụ anwụ bushing | 1 set |
| Ihe ngbanwe ihuenyo hydraulic | 1 set |
| 6m oghere tank na igwe anaghị agba nchara 304 | 1 set |
| 6m tank mmiri jụrụ oyi | 1 set |
| Na-ebupụ unit | 1 set |
| Igwe eji egbutu | 1 set |
| Igwe ikuku ikuku ugboro abụọ (site na 16-50MM) | 1 set |
| Igwe winder otu ọnọdụ (site na 63-110 mm) | 1 set |
| Mapụtara akụkụ efu Nnwale igwe anwụrụ | |
| 20HP ikuku chillerikuku jụrụ oyi ụdị mmiri chiller na compressor Panasonic | 1 set |
| Ịghasa ụdị ikuku compressor 15kw | 1 set |
| Crusher 20-110mm swp400 nwere moto 18.5kw | 1 set |
| Ihe nbipute laser | 1 set |
| FOB QINGDAO USD |
1.Ụgwọ:30% ala-ụgwọ site T / T, ndị ọzọ 70% site T / T ma ọ bụ LC tupu Mbupu
2.OGE Ebupu: 30ụbọchị ọrụ
3. Akwụkwọ ikike: otu afọakwụkwọ ikike, ọrụ na-adị ogologo ndụ
HDPE 110mm ọkpọkọ extrusion mmepụta akara
Nkọwa zuru oke:
1, Product size: PE Pipe OD16-OD110mm,Pipe mgbidi ọkpụrụkpụ dị ka asịwo chọrọ
2, Max mmepụta ikike: 180kg / h
3, Inlet jụrụ mmiri okpomọkụ: <25 ℃ ikuku mgbali:> 0.6Mpa
4, Eletriki ike ọkọnọ: 3Phase / 380V / 50HZ
5. dabara maka PE ọhụrụ na ihe eji emegharị ihe.
6.design L maka ọkpọkọ ọkpọkọ. Ogologo n'ime 21meters
16-110 PE ọkpọkọ mmepụta ahịrị
A. Igwe dị mkpa maka 16-110mm PE Pipe Extrusion Line
- 1 set nke akpaka oghere loader
- 1set hopper draya
- 1 setịpụrụ nke Single-Screw Extruder - SJ65/33
- 1 set nke SJ25/25 ngalaba-extruder
- 1 setịpụrụ ihe ngbanwe ihuenyo akpaka
- 1 zuru ezu set Ebu maka 16-110mm
- 1 set nke Vacuum Calibration na tank mmiri jụrụ oyi
- 1 set nke traktọ pedrails abụọ
- 1 set nke uzuzu uzuzu Cutter efu
B.Nkọwa nka nka nke igwe ọ bụla n'elu
Usoro eruba nke PE ọkpọkọ mmepụta akara dị ka ndị a:
Ihe na-eri nri → Hopper dryer → Extruding & Molding → Vacuum calibration and Cooling → Printer → Akwụsị → Ịcha → Ikpeazụ PE ọkpọkọ
1.Ihe nkwụnye ihe akpaaka
| NO | Nkọwa | Nkeji | ZJ-200 |
| ﹡ ụkpụrụ arụ ọrụ: vacuum suction﹡ bido na akpaghị aka ma kwụsị ọrụ nbudata | |||
| Ọrụ: kwụọ PE granules n'ime igwe nkụ | |||
| 1 | Oke nrụgide kwụ ọtọ. | Pa | 9800 |
| 2 | Ike moto | KW | 1.1 |
| 3 | Ọkụ eletrik chọrọ | Dị ka arịrịọ | |
| 4 | ikike | 5m | 200kg / h |
| 10m | 150kg / h | ||
| 5 | Olu hopper mmiri ara ehi | L | 10 |
2.1 set nke Hopper draya
| NO | Nkọwa | Nkeji | Okwu |
| 1 | Dayameta gbọmgbọm | mm | 600 |
| 2 | Ihe onwunwe | / | Igwe anaghị agba nchara |
| 3 | Window enyo anya | / | ee |
| 4 | Efere ọnụ ụzọ slide ala | / | ee |
| 5 | Ike ikpo ọkụ | Kw | 9 |
| 6 | Ike nke ikuku ikuku | kw | 0.55 |
3. 1 set nke SJ65/33 otu ịghasa extruder
| ﹡Screw, gbọmgbọm imewe na n'ichepụta banye European elu technology (site na nnukwu ama ịghasa gbọmgbọm ụlọ ọrụ)﹡Kwụsa na gbọmgbọm ihe:38CrMoAlA, nitriding emeso ﹡ Nanị ịghasa maka ihe PE jide n'aka na ọ ga-enwe mmetụta plasticizing dị mma ﹡ nabata akụrụngwa eletrik ama ama ama ama yana ịdị mma na-agba ọsọ dị elu. Gearbox: elu torque, obere mkpọtụ, ike gia eze ihu raara onwe ya nye extruder gia igbe. ﹡Sistemụ nchekwa onwe: N'elu nchebe nke moto ugbu a N'elu nrụgide nchebe nke ịghasa | ||
| Nkọwa zuru oke | Isi ihe eletrik | Ihe ntụgharị ugboro ugboro: ABB/deltaAC kọntaktị: Schneider ma ọ bụ siemens Mgbanwe nkwụsị ikuku: Schneider Onye na-ahụ maka okpomọkụ: omron/delta Mita voltaji na mita dị ugbu a: DELIXI |
| Mpụta | Ihe dị ka 200kg / h | |
| Jikọọ ụdị extruder na ebu | Njikọ njikọ | |
| Uru | Isi akụkụ na-ewere akara n'ọkwa dị eluNjikwa mma n'ezie oge siri ike | |
| Ịghasa | Dayameta (mm) | 65mm |
| L/D | 33/1 | |
| Ihe onwunwe | 38CrMoAlA, Nitrogen na-agwọ ya | |
| kpo oku | Nkedo ikpo ọkụ aluminom nwere mkpuchi elu igwe anaghị agba nchara | |
| Akụkụ ọkụ | mpaghara 5 | |
| Ike ikpo ọkụ | 20kw | |
| gbọmgbọm | Ụdị gbọmgbọm | Na uzo nri;Mmiri jụrụ oyiọnụ ụzọ mbata |
| Na-ajụ oyi | Na-ajụ oyi site na ikuku,ziri ezi njikwa okpomọkụ: ± 1 ℃ | |
| Akụkụ jụrụ oyi | Akụkụ 5 | |
| Ihe onwunwe | 38CrMoAlA, Nitrogen na-agwọ ya | |
| Ụgbọala naUsoro nnyefe | Ike moto (KW) | 55kw ama ama na china |
| Ụdị nhazi ngwa ngwa nke isi moto | Ntụgharị mgbanwe ugboro ugboro | |
| Ọsọ moto isi na-atụgharị (r/min) | 1500r/min | |
| Igbe igbe | Ihu eze siri ike gia Nhazi mkpọtụ dị alaShaft: NSK nke Japan Ihe eji eme ihe: 20CrMnTi | |
4. 1 set nke akara akara ngalaba-extruder SJ25/25
| Ihe | Nkọwa | Nkeji | SJ25/25 |
| 1 | Dayameta nke ịghasa | mm | 25 |
| 2 | Oke nke ogologo ruo dayameta |
| 25:1 |
| 3 | Mpụta | Kg/h | 1.5-10 |
| 4 | Ọsọ ntụgharị nke ịghasa | ntụgharị/min | 5-50 |
| 5 | Ihe nke Screw barrel na kposara |
| 38CrMoAlA |
| 6 | Igbe igbe |
| Ihu eze siri ike, obere mkpọtụ imewe |
| 7 | Ike ikpo ọkụ nke gbọmgbọm Screw | KW | 6 |
| 8 | Ebe kpo oku nke gbọmgbọm |
| 2 |
| 9 | Isi ike moto | Kw | 0.75 |
| 10 | Ụdị Ndozi Ọsọ |
| ntụgharị ugboro ugboro |
| 11 | Iju oyi maka gbọmgbọm |
| Ikuku ikuku jụrụ oyi, 2- mpaghara |
| 12 | Elu nke Screw Axes | mm | 1000 |
| 13 | Onye na-ahụ maka okpomọkụ |
| Brand: omron, Japan |
| 14 | Ntụgharị ugboro ugboro |
| Akara:ABB, Japan |
| 15 | Akụkụ onyonyo | mm | 1450×450×1500 |
| 16 | Ibu | kg | 250 |
5. 1 set nke ebu maka HDPE ọkpọkọ na dayameta si 16--110mm
| Ihe | Nkọwa | Nkeji | kwuo | ||||
| ﹡ Ụdị calibrator ọhụrụ hụ na mmetụta dị jụụ dị mma yana extrusion dị elu
| |||||||
| 1 | Oke dayameta (OD) | mm | 16-110 mm | ||||
| 2 | Ọkpụrụkpụ mgbidi | / | dị ka kwa ahịa arịrịọ | ||||
| 3 | Ihe ebu | / | 40Cr | ||||
| 4 | Ihe nke calibration Bushing | / | Ọla kọpa sternum | ||||
| Nkọwapụta | Ọkpụrụkpụ mgbidi PN10 (SDR17) | Ọkpụrụkpụ mgbidi PN16 (SDR11) | |||||
| 16 mm | 1.8mm (SDR9) | ||||||
| 20mm | 1.9mm | ||||||
| 25mm | 1.8mm | 2.3mm | |||||
| 32mm | 1.9mm | 2.9mm | |||||
| 40mm | 2.4mm | 3.7mm | |||||
| 50mm | 3.0mm | 4.6mm | |||||
| 63 mm | 3.8mm | 5.8mm | |||||
| 75mm | 4.5mm | 6.8mm | |||||
| 90mm | 5.4mm | 8.2mm | |||||
| 110mm | 6.0mm | 10.0mm | |||||
6. 1 set nkeVacuum calibration na tank jụrụ oyi
| NO | Nkọwa | Nkeji | kwuo |
| ﹡ njikwa ọkwa mmiri akpaka﹡ kabinet eletrik nwere nchebe mmiri ﹡ ike ịgbanye mmiri jụrụ oyi nwere mmetụta dị jụụ dị mma ﹡ mgbapụta agụụ na mgbapụta mmiri na-anabata mgbapụta nwere ọgụgụ isi na ọrụ nchekwa onwe ya ﹡ Nhazi pipeline zuru oke nwere ike ime ka egbochichie nozulu
| |||
| Ọrụ: hazie dayameta mpụta na ọkpọkọ jụrụ oyi bụ isi | |||
| 1 | Ogologo tankị ahụ | mm | 6000 |
| 2 | Ihe nke tank mmiri | igwe anaghị agba nchara, SUS304 | |
| 3 | Nhazi ihe eji eme ihe | Stannum-ọla | |
| 4 | Ọnọdụ jụrụ oyi | Ịgbasa na-agba ume | |
| 5 | Ịgbasa ebe | 4 | |
| 6 | Ike mgbapụta mmiri | KW | 1.5kw × 2set |
| 7 | Ike mgbapụta Vacuum | KW | 4kw |
| 8 | Degree Vacuum | Mpa | -0.03-0.05 |
| 9 | Oke ngagharị nkeIhu na azu | mm | ± 600, moto ụgbọala |
| 10 | Oke mgbakwasa mgbada | mm | ±50, site na ntuziaka |
| 11 | Akụkụ onyonyo | mm | 6000×650×1250 |
| 12 | ibu | kg | 1250 |
1 set nke igwe na-ebugharị
| NO | Nkọwa | Nkeji | kwuo |
| ﹡Mkpọchi nke ikuku pneumatic, na-agbanwe ọsọ ọsọ ugboro ugboro ﹡ nweta akara cylinder ama ama | |||
| Ọrụ: bupụ ọkpọkọ PE nke ọma yana mekọrịta ya na ọsọ extruder | |||
| 1 | Ogologo pedrail dị | mm | 1400 |
| 2 | Ụdị njigide | Na ikuku ikuku | |
| 3 | Ụdị Ndozi Ọsọ | Ntụgharị ugboro ugboro | |
| 4 | Ikike moto | KW | 1.5kw*2 set |
| 5 | Ọsọ mbufe | m/min | 0.5 ~ 8 |
1 set nke ngwa nbipute laser
1 set nke mita ọnụ cutter
| NO | Nkọwa | Nkeji | kwuo |
| egbutu uzuzu na-akpaghị aka, nwere ọrụ ịgụta mita ﹡Ahịhịa agụba na-anabata agụba carbide Oti mkpu na agụta setịpụ ihe mkpofu uzuzu efu | |||
| Ọrụ: belata ọkpọkọ HDPE n'ogologo ogologo | |||
| 1 | Ụdị cutter | Onye na-agụ mita akpaaka | |
| 2 | Kwesịrị ekwesị ịkpụ ọkpọkọ dayameta | 16-110 mm | |
| 3 | Ịcha ọsọ | Mmekọrịta, ịkpụ akpaka na ogologo ogologo | |
| 4 | Ike moto | KW | 2.2 |
| 5 | Ihe nke ịcha osisi | Alloy ígwè | |
| 6 | Ụdị njigide | Na-anya ikuku | |
| 8 | Ọkpụrụkpụ ịkpụ kacha | mm | 18 |
| 9 | Kwesịrị ekwesị ịkpụ ọsọ | m/min | 12 |
Foto nke Winder:
Parameters na tebụl nhazi nke chiller
| PARAMETER NKE Nhazi | SYF-20 | |
| Ike refrigerate | Kw 50Hz/60Hz | 59.8 |
| 71.8 | ||
| Ike ọkọnọ na eletriki components (Schneider, France) | 380V 50HZ | |
| Igwe nju oyi (East Mountain) | Aha | R22 |
| Ụdị njikwa | valvụ mgbasawanye nke ime n'ime (Hongsen) | |
| The compressor (Panasonic) | Ụdị | Ụdị vortex mechiri emechi (10HP * 2 sts) |
| Ike (Kw) | 18.12 | |
|
Ihe condenser (Shunyike) | Ụdị | Ngwunye ọla kọpa na-arụ ọrụ dị elu + obere mkpọtụ mpụta rotor fan |
| Ike fan na ọnụọgụgụ | 0.6Kw*2 set (Juwei) | |
| Olu ikuku jụrụ oyi (m³/h) | 13600 (Nlereanya 600) | |
|
The evaporator (Shunyike) | Ụdị | Ụdị eriri mmiri tankị |
| Oke mmiri oyi kpọnwụrụ (m³/h) | 12.94 | |
| 15.53 | ||
| Ikike tankị (L) | 350 (igwe anaghị agba nchara, mpụga mkpuchi) | |
|
Mgbapu mmiri (Taiwan Yuanli) | Ike (Kw) | 1.5 |
| ebuli (m) | 18 | |
| Ọnụego mgbaba (m³) | 21.6 | |
| Pipe dayameta interface | DN50 | |
| Nchekwa na nchekwa | Compressor overheat nchedo, overcurrent nchedo, elu na ala nrụgide nchebe, overheterature nchedo, usoro usoro / usoro nchebe, iyuzucha oke okpomọkụ nchebe. | |
| Akụkụ igwe (efesa elu) | Ogologo (mm) | 2100 |
| Obosara (mm) | 1000 | |
| Oke (mm) | 1600 | |
| Ntinye mkpokọta ike | KW | 20 |
| Ibu igwe | KG | 750 |
Cheta na: 1.The refrigerating ikike dabeere: kefriza mmiri mbata na ntinye mmiri okpomọkụ 7 ℃ / 12 ℃, jụrụ mbata na ntinye ifufe okpomọkụ 30 ℃ / 35 ℃.
2.Scope nke ọrụ: oyi kpọnwụrụ mmiri okpomọkụ nso: 5 ℃to35 ℃;Freezing mmiri ntinye na ntinye okpomọkụ dị iche: 3℃to8 ℃, The ihere okpomọkụ bụ bụghị elu karịa 35 ℃.
Ndobere ikike ịgbanwe paramita dị n'elu ma ọ bụ akụkụ na-enweghị ọkwa.
Oge nzipu: Sep-13-2022